Pneumatic Angle Seat Valve Screwed End

Part Name Actuator
Body SS 304 Pressed
Size Range 1/2″ to 4″
Cover Flange ASTM A351 Gr. Cf8 (SS 304) Investment Die-Cast
Spring Spring Steel (IS 4454 Gr. III)
Port Connection 1/4″ BSP (NPT on request)
Operating Pressure 3.5 to 7 Bar
Position Indicator Nylon
Operating Cycles 350 to 650 Cycles / Hr.
Media Dry Lubricated Air / Inert Gasses Jekon Moisture Separators are advised to use inline
Specification Pneumatic Angle Seat Valve Screwed End
MODEL JYCV-S
SIZE 1/2″ TO 4″ (15MM TO 100MM)
BODY CF8/CF8M
MOC S.S.304/S.S.316/ S.S.316L/WCB
SEAT PTFE
TYPE NORMALLY CLOSE
PRESSURE UP TO 16BAR
TEMPERATURE 250 C MAX
AIR PRESSURE 2 TO 7 BAR
ENDS SCREWED
MEDIA AIR, WATER, OIL, GAS, STEAM, CHEMICAL, ETC
Dimensions
Valve Type Size M E PCD OD T
Inch mm
JYCV-S-F-15 1/2″ 15 72 130 60.3 88.94 11.1
JYCV-S-F-20 3/4″ 20 75 150 69.9 98.4 12.7
JYCV-S-F-25 1″ 25 90 160 79.4 107.4 14.3
JYCV-S-F-40 1-1/2″ 40 125 195 98.4 127 17.5
JYCV-S-F-50 2″ 50 152 230 120.6 152.4 19
JYCV-S-F-65 2.5″ 63 165 216 139.7 177.8 22.2
JYCV-S-F-80 3″ 80 170 242 152.4 190.5 23.8
JYCV-S-F-100 4″ 100 210 293 190.5 228.6 23.8
Technical Specification
  Model   Valve Size   Orifice MM   Inlet Position Max. Op. Press Low to Close Bar Max. Op. Press Low to Open Bar   Flow Factor M3/hr   Air Consumption Lit/Cycle
JYCV-15   1/2″ 16 N/C 16 16 4.2 0.155
JYCV-15 16 N/O 16 16 4.2 0.155
JYCV-20   3/4″ 16 N/C 16 16 5.5 0.155
JYCV-20 16 N/O 16 16 5.5 0.155
JYCV-25   1″ 23 N/C 16 16 13.5 0.161
JYCV-25 23 N/O 16 16 13.5 0.161
JYCV-40   1.1/2″ 34 N/C 15 15 31.9 0.172
JYCV-40 34 N/O 10 10 31.9 0.172
JYCV-50   2″ 45 N/C 14 16 54.5 0.184
JYCV-50 45 N/O 16 12 54.5 0.184
JYCV-65   2.1/2″ 62 N/C 14 16 54.5 0.184
JYCV-65 62 N/O 16 12 54.5 0.184
JYCV-80   3″ 75 N/C 10 10 105 0.735
JYCV-80 75 N/O 10 10 105 0.735