| Part Name | Material of Construction : | |
| Body | Aluminum | |
| Shaft (Pinion) | EN 8 / AISI SS 304 | |
| Caps | Aluminum Pressure die cast | |
| Guides | Low friction acetalic resin | |
| Pistons (Racks) | Aluminum Pressure die cast. | |
| Bolts | Stainless Steel | |
| Springs | Pre-loaded spring cartridges. | |
| Sealing | Nitrile (Viton or EPDM Avail.) | |
| Material of Construction : | ||||||||||||||||
| Model | A | B | C | E | F | ØG | ØH | I | K | L | ØM | ØN | P1 | P1 | SQUARE | |
| JDA-45 | 162.2 | 62 | 66.2 | 19.5 | 16 | 22 | 33 | 11 | 80 | 22 | 50 | 50 | M8 x 12 | M6 x 9 | 09 x 09 | |
| JDA-55 | 169 | 73 | 76 | 20 | 14 | 15 | 23 | 18 | 80 | 12 | 50 | 50 | M8 x 12 | M6 x 9 | 11×11 | |
| JDA-65 | 216 | 84.5 | 87.8 | 20 | 14 | 18 | 29 | 18 | 80 | 14 | 50 | 50 | M8 x 15 | M6 x 12 | 14 x 14 | |
| JDA-75 | 232 | 93.5 | 98 | 20 | 14 | 18 | 30 | 18 | 80 | 14 | 50 | 50 | M8 x 15 | M6 x 15 | 17 x 17 | |
| JDA-85 | 271 | 105.5 | 108.7 | 20 | 14 | 21 | 34 | 18 | 80 | 17 | 50 | 50 | M8 x 15 | M6 x 15 | 17 x 17 | |
| JDA-100 | 293 | 122 | 125.7 | 20 | 12 | 23 | 38 | 23 | 80/130 | 17 | 70 | 70 | M10 x 20 | M8 x 15 | 22 x 22 | |
| JDA-115 | 346 | 139.5 | 140.5 | 20 | 12 | 30 | 47 | 23 | 80/130 | 20 | 70 | 70 | M10 x 20 | M8 x 15 | 22 x 22 | |
| JDA-125 | 405 | 149 | 152.5 | 20 | 12 | 30 | 47 | 30 | 80/130 | 20 | 102 | 102 | M12 x 20 | M10 x 20 | 22 x 22 | |
| JDA-150 | 475 | 183 | 186.5 | 30 | 20 | 38 | 55 | 30 | 80/130 | 30 | 102 | 102 | M12 x 20 | M10 x 20 | 27 x 27 | |
| JDA-175 | 521 | 210 | 215 | 30 | 18 | 43 | 62 | 30 | 80/130 | 32 | 102 | 102 | M12 x 25 | M10 x20 | 27 x27 | |
| JDA-200 | 641 | 237.5 | 248 | 30 | 19 | 50 | 72 | 45 | 80/130 | 36 | 125 | 125 | M12 x 25 | M12 x25 | 36 x36 | |
“JEKON” is the brand, who offers Pneumatic Actuator for all your 90° & 180° valves & dampers Automation Requirements.
Why “JEKON” actuator ! because…
“1. Namur Standard Pinion Top (An International Standard) The pinion (shaft) top drilled and sloited for easy assembling o switch, positioners and other accessories
2. Namur Pad for Solenoid Valve (An International Standards) Air supply ports are covered with interface plate as per NAMUR standard to facilitate direct mounting of solenoid valve at actuator.
3. ISO – 5211 Standard Mounting for Valve (An International Standard) Double bottom drilling for actuator to valve Assembling & centering Designed for strength and easy mounting or interchangeability.
4. ISO)-5211 Standard Pinion Bottom (An International Standard) Bottom of the pinion (Shaft) as female key, double square hole for assembling on valves. with Square key stem and in line or turned to 45° Designed for strength and sure-fix with stem
5. Sliding Skates : The innovation for replaceable sliding skates. between Pistons (Racks) and internal bore surface of the Actuator, just to avoid metal contact. which enhances the Actuator life
6. Pre-Lopaded Spring Cartridges : The introduction of pre-loaded spring cartridges, that remove the danger in the case of disassembly of spring return Actuator, and that allows easy change of spring number present inside.
7. Compact Design : “”JEKON”” Actuators are designed as compact and common for both double acting and single acting (spring return) which offers high torque valves, Internal sliding surface lapped and anodized for minimum friction and long long life of actuator.”
“General Features :
1. Opt. press : 15 to 150 psi
2. Temperature range : 20° C to 90° C
3. Air supply : Filtered, dry or lubricated.
4. Ext. protection : corrosion strength to 500 hours in salted for”