Electrical Actuator Double Acting & Modulating Manufacturer in India

electrical motorized actuator double acting modulating drawing
electrical motorized actuator double acting modulating drawing India
electrical motorized actuator double acting modulating drawing Manufacturer
electrical motorized actuator double acting modulating drawing
electrical actuator double acting modulating
electrical motorized actuator double acting modulating
electrical actuator double acting modulating
electrical actuator double acting modulating Manufacturer
Part Name Actuator
SPECIFICATION DETAILS
Supply Voltage Single phase 230 V + /-10%, 50 Hz + /-5%, also available in 24 VAC / 110 V AC Supply & 24 VDC
Duty S2-10 min, S4-30% – 1200 cycles/hour.
Insulation resistance 100 MW – 500 VDC
Self-locking The self-locking facility of the actuators is provided by the mechanical locking feature of the worm-worm wheel mechanism.
Local position indicator A continuous local mechanical position indicator is provided with an actuator which always gives a faithful indication of the actuator position, independent of the power supply
Adjustable mechanical stoppers Two adjustable mechanical stoppers are provided with actuators in open & close directions this feature gives backup safety to the final control device
Auxiliary limit switches Maximum four numbers of micro limit switches for end position can be provided type: 1 No _ 1 NC Change over contact.
Contact rating: 10A, 125 – 250 V AC
Feedback potentiometer High-resolution potentiometer Feedback – Continuous Type: 100 to 235
Position controller unit (PCU) Field/Panel mounted having input signal: 4-20 mA/0-10 V DC for Remote Monitoring & Control
Position Transmitter Actuator mounted having input from actuator mounted Potentiometer & output will be 4-20 mA Proportionate.

Special accessories also can be supplied on request after confirmation with SDTORK

Technical Specification
MODEL A B C D E F G H I J K L * M MOUNTING
JASBV-40 82 78 89 151 24 114 64 160 138 80 72 14×14 (17 Depth) M5 x 4 Holes off center on 36 PCD
M6 x 4 Holes off center on 50 PCD
M8 x 4 Holes off center on 70 PCD
JASBV-50 82 78 89 151 24 114 64 160 138 80 72 14×14 (17 Depth)
JASBV-65 97 99 95 170 24 122 72 196 146 98 86 17×17 (20 Depth) M6 x 4 Holes off center on 50 PCD
M8 x 4 Holes off center on 70 PCD
JASBV-80 121 135 105.5 208 24 156 108 180 256 135 106 22×22(25 Depth)  

M8 x 4 Holes off center on 70 PCD
M10 x 4 Holes off center on 102 PCD
JASBV-100 121 135 105.5 208 24 156 106 180 256 135 105 22×22(25 Depth)
JASBV-125 121 135 105.5 208 24 156 106 180 256 135 105 22×22(25 Depth)
JASBV-150 121 135 105.5 208 24 156 106 180 256 135 105 22×22(25 Depth)
JASBV-200 128 152 80 235 22 163 103 185 280 170 106 27×27 (45 Depth) M10 x 4 Holes off center on 102 PCD
M12 x 4 Holes off center on 125 PCD